濟南停車棚在我們生活中的應用范圍已經越來越廣泛的時候，重要的就是對于的安裝。那在這其中需要滿足哪些技術性的要求呢?就讓我們仔細看一看吧!

Jinan parking shed has been more and more widely used in our life. The important thing is the installation of the shed. What technical requirements need to be met? Let's take a closer look!

一，在安裝的時候應該嚴格按照固定的程序進行，對于它的安裝包括了三個部分，一是展開，二是固定，三是成形，三者有著先后順序，決不可顛倒進行。

1、 The installation should be carried out in strict accordance with the fixed procedures. The installation includes three parts, one is expansion, the other is fixation, and the third is forming. The three parts have a sequence and must not be reversed.

二，和其它建材相比，還是比較脆弱的，而在安裝的過程中肯定要在其表面進行操作。為了避免對它造成傷害，要求在膜面上設置一層網，其次就是要求施工者穿上較軟的鞋子。

2、 Compared with other building materials, it is still fragile and must be operated on its surface during installation. In order to avoid causing damage to it, a layer of safety net is required to be set on the membrane surface, and then the constructor is required to wear soft shoes.

三，對于的安裝要考慮到天氣狀況，如條件比較惡劣，比如風力較大、雨水較多的時候應該停止施工，待惡劣天氣過后再重新進行。因為風力較大的話，膜面以及下面的支柱容易出現顫動，既影響施工效果，也影響人員的。而雨水較多也容易使雨水在膜面上堆積。

3、 For installation, the weather conditions shall be taken into consideration. If the conditions are relatively bad, such as strong wind and heavy rain, the construction shall be stopped, and the construction shall be resumed after the bad weather. Because of the strong wind force, the membrane surface and the pillar under it are prone to flutter, which affects the construction effect and the safety of personnel. And more rain is also easy to accumulate on the membrane surface.

四，對于已經施工好的膜面一定要采取保護措施，以免在進行其它工作的時候原有的工程受到損壞

4、 Protective measures must be taken for the membrane surface that has been constructed to avoid damage to the original project during other work

五，因為具有良好的拉力，而不同的建筑所需要張拉的程度是不一樣的，所以在建造之前應該先確定好張拉的大小，而在后期施工的時候更要嚴格控制。

5、 Because it has good tension, and the degree of tension required by different buildings is different, so the size of tension should be determined before construction, and it should be strictly controlled during later construction.

對于停車棚的一些組裝工作，一定要嚴格遵循工藝標準，如果主要的連接件還沒有安裝，那要先用牢固的壓繩固定好，以免建筑出現晃動。有需求可以和我們http://www.xilizx.com聯系！

For some assembly work of the parking shed, the process standards must be strictly followed. If the main connectors have not been installed, they must be fixed with a firm pressure rope to avoid shaking of the building. You can contact us if you need http://www.xilizx.com Contact!